Kailua -S I N G L E- Fin Model
Kailua Single Fin Model:
Around 1976, I started shaping & building Wing Round Pin single fins on the North Shore. They had very flat decks, and fuller yet low rails and they were really a consistent riding board I enjoyed shaping. When Rob Burns started Local Motion in Kailua, Oahu, I became his first shaper and this was a really popular model I was building then around LM Kailua team rider, Buzzy Kerbox. So, this model replica is aptly named "The Kailua Model.
Kailua Single Fin Model:
5'10 ~ 6'10
While I think it’s helpful to have rider weight and dimensions: remember these are only a general guide. My team will work personally with all my customers and their specific needs
5’10 x 19.75 x 2.75 @34.4cl
6'0 x 19.87 x 2.87 @37.2cl
6'2 x 20.25 x 2.81 @39.7cl
6'4 x 20.50 x 3.00 @41.3cl
6'6 x 20.75 x 3.06 @46.0cl
6'8 x 20.87 x 3.06 @47.8cl
6'10 x 21.25 x 3.12 @50.6cl
Kailua Single Fin Model:
Around 1976, I started shaping & building Wing Round Pin single fins on the North Shore. They had very flat decks, and fuller yet low rails and they were really a consistent riding board I enjoyed shaping. When Rob Burns started Local Motion in Kailua, Oahu, I became his first shaper and this was a really popular model I was building then around LM Kailua team rider, Buzzy Kerbox. So, this model replica is aptly named "The Kailua Model.
Kailua Single Fin Model:
5'10 ~ 6'10
While I think it’s helpful to have rider weight and dimensions: remember these are only a general guide. My team will work personally with all my customers and their specific needs
5’10 x 19.75 x 2.75 @34.4cl
6'0 x 19.87 x 2.87 @37.2cl
6'2 x 20.25 x 2.81 @39.7cl
6'4 x 20.50 x 3.00 @41.3cl
6'6 x 20.75 x 3.06 @46.0cl
6'8 x 20.87 x 3.06 @47.8cl
6'10 x 21.25 x 3.12 @50.6cl
Kailua Single Fin Model:
Around 1976, I started shaping & building Wing Round Pin single fins on the North Shore. They had very flat decks, and fuller yet low rails and they were really a consistent riding board I enjoyed shaping. When Rob Burns started Local Motion in Kailua, Oahu, I became his first shaper and this was a really popular model I was building then around LM Kailua team rider, Buzzy Kerbox. So, this model replica is aptly named "The Kailua Model.
Kailua Single Fin Model:
5'10 ~ 6'10
While I think it’s helpful to have rider weight and dimensions: remember these are only a general guide. My team will work personally with all my customers and their specific needs
5’10 x 19.75 x 2.75 @34.4cl
6'0 x 19.87 x 2.87 @37.2cl
6'2 x 20.25 x 2.81 @39.7cl
6'4 x 20.50 x 3.00 @41.3cl
6'6 x 20.75 x 3.06 @46.0cl
6'8 x 20.87 x 3.06 @47.8cl
6'10 x 21.25 x 3.12 @50.6cl